SV-LCP Series — Air-Cooled MINI Cabinet-Type Single-Mode Pulsed Laser Cleaning Machine
The SV-LCP Series is an air-cooled MINI cabinet-type single-mode pulsed laser cleaning system. Every unit — laser source, control and cooling — is integrated into one compact mobile cabinet on casters, so the machine can be wheeled directly to the workpiece, w…
SV-LCP Series
The SV-LCP Series is an air-cooled MINI cabinet-type single-mode pulsed laser cleaning system. Every unit — laser source, control and cooling — is integrated into one compact mobile cabinet on casters, so the machine can be wheeled directly to the workpiece, while the cabinet cooling system ensures it operates under the required environmental conditions. Single-mode pulsed output delivers high peak energy with very low heat input, removing rust, oxide layers, coatings and oil without damaging the substrate.
Key Features of the SV-LCP Series
Greater power for higher cleaning efficiency
the single-mode pulsed source provides higher laser energy than comparable compact units.
All-in-one MINI mobile cabinet
all units integrated into a single cabinet with casters for easy mobility on site.
Cabinet cooling system
ensures the equipment operates under the required environmental conditions during continuous work.
Fully air-cooled
no chiller, no water circuit and no water-side maintenance.
Stepless frequency adjustment, 1–4000KHz
tune the process to the contamination layer and substrate.
Scan width adjustable 10–140mm with 9 dual-axis scanning modes
from narrow precision tracks to wide-area sweeps.
Lightweight cleaning head
≤0.9kg, reducing operator fatigue during on-site work.
Handheld or automated operation
usable as a manual gun or integrated into an automated cell.
No chemicals, no consumables, no water, no secondary pollution
a genuinely green process with no waste liquid to treat.
Where the SV-LCP Series Works
Industries
- factory workshop workpiece cleaning
- rail transit vehicle body cleaning
- ship hull rust and paint removal
- surface treatment of large equipment in steel mills
- mould manufacturing and maintenance
- precision machining
- automotive parts
- weld pre- and post-treatment.
Materials
- moulds
- gears
- guide rails
- pistons
- aluminium alloy
- titanium alloy
- hot-rolled steel
- stainless steel and copper
Technical Specifications
All working areas, sheet sizes, pipe lengths, storage capacities and automation configurations are built to order and can be customised to your production requirements.
| Item | Parameter |
|---|---|
| — | — |
| Machine model | SV-LCP100 / SV-LCP200 / SV-LCP300 |
| Laser type | Single-mode pulsed fiber laser |
| Average laser power | 100W / 200W / 300W |
| Cooling method | Air cooling |
| Cabinet | MINI mobile cabinet with casters and integrated cabinet cooling system |
| Power supply | Single-phase 220V ±10%, 50/60Hz AC (customisable: 110V, 50Hz AC) |
| Max. single pulse energy | 2mJ |
| Frequency adjustment range | 1–4000KHz, stepless adjustment |
| Fiber length | 5m |
| Scan width | Adjustable 10–140mm, dual-axis support for 9 scanning modes |
| Device size | 583 × 259 × 356.5mm |
| Device weight | 38kg |
| Post-packaging weight | 50kg (SV-LCP200) / 60kg (SV-LCP300) |
| Cleaning head weight | ≤0.9kg (SV-LCP200) / ≤1.25kg (SV-LCP300) |
| Operation method | Handheld / automated |
Recommended Partners for Your Production Line
Talk to an Application Engineer About the SV-LCP Series
Tell us about your material, thickness, working area and target throughput — we will recommend the right configuration and send you a tailored quotation.
GET A QUICK QUOTE
Tell Us Your Needs
Fill in the form and our engineer will contact you within 24 hours.